Pulse™ Hot Runner Controllers

  • Configurations of 30-zone capacity cabinets up to 180-zones.
  • Optional I/O for integration with the injection molding machine and other equipment
  • 10.1″ LCD, 1024 x 600 resolution touchscreen HMI w/ ethernet for VNC Viewer and USB for saving screenshots
  • Compact footprint
  • Remote mount display option
  • 240V w/ integrated transformer up to 45 KVA
Get a Quote
Fast Heat Pulse Hot Runner Controller

Fast Heat Pulse Hot Runner Controller

  • Customer Specified Connectors
  • Moisture Bake-Out
  • Evensoak (zone managed sequential start-up)
  • Update Zones by Group
  • Slave Zones Automatically or Manually
  • Store up to 50 Recipes
  • 3-Level Customizable Security Codes
  • Constant Tuning PID Algorithm
  • Max % Power Control/Alarm (able to use lower amp service and detect leaks)
  • Instant Diagnostics
  • Active Thermocouple Protection*
  • Energy Saving Waterfall Technology (minimizes peak KWh and amp draw)
  • 4-Channel I/O for Softsoak & Alarm Outputs and Inputs for Run, Stop, Boost, Idle
  • 10″ LCD HMI w/ VNC Viewer
  • 240V 3-Phase.
  • Options – Remote Mount Display Cable, 15 or 45 kVA Integrated Transformers

Why Choose Pulse Hot Runner Temperature Controls?

There has been a trend over the last decade to integrate hot runner temperature controls into injection molding machines. While this may seem like a good idea, molders are sacrificing a lot of value that comes with a specialized hot runner temperature control like our Fast Heat Pulse controller. Our temperature controller is also a valuable tool for other applications such as extrusion, compression molding and any application with simplicity, precise control and work-cell integration are important.

Pulse vs Other Integrated Controls Pulse Others
Easily Expandable w/ 30-Zone Cabinets Yes No
Waterfall Technology Power Mgt (min peak KWh) Yes No
Max % Power Limit (enables lower amp service) Yes No
Active Thermocouple Protection Yes No
Table-Top MoldXChecker Optional Yes No
Tabular 30-Zone View and Mgt by Group Yes No
4-Channel I/O Automation – Soak Timer, Alarms, Run/Stop/Boost/Idle Yes Some
Embedded Firmware (no hard drive) Yes Some
Instant Diagnostics Yes Most
Multi-Level Security Yes Most
LCD Touchscreen w/ VNC Viewer (Ethernet) Yes Most
Recipe Storage Yes Yes
Zone Slaving (Auto and Manual) Yes Yes
Evensoak Sequential Group Start-Up Yes Yes
Moisture Bake-Out Yes Yes
Request Full Tutorial
*How Active Thermocouple Protection Works

A positive temperature coefficient (PTC) device allows the amount of current generated during the normal operation of a thermocouple to flow through but shuts down when the current flowing through becomes too high. Unlike conventional fuses, the PTC resets itself when the current drops to a normal level.  The time it takes to trip the device (time-to-trip) depends on the current and falls rapidly as the current increases.

Pulse Hot Runner Controller Spare Parts